Caller id, Answering system – AT&T 2325/2365 User Manual
Page 60

CALLER ID
PROBLEM SOLUTION
If the caller’s name or
• You should call your service provider to
phone number is not
confirm that you subscribe to combined
displayed during
Caller ID with Call Waiting service.
Call Waiting:
• Caller ID information received during
Call Waiting is displayed only on the
handset that is in use. The information
is stored in the Caller ID log on ALL
registered handsets.
• Make sure the battery is charged.
ANSWERING SYSTEM
PROBLEM SOLUTION
If messages are
• If a caller leaves a very long message,
incomplete:
part of it may be lost when the system
disconnects the call after three minutes.
• If the caller pauses for more than seven
seconds, the system stops recording and
disconnects the call.
• If the system’s memory becomes full
during a message, the system stops
recording and disconnects the call.
PROBLEM SOLUTION
If you have difficulty
Check the volume setting.
hearing messages:
PROBLEM SOLUTION
If callers are unable to
Re-record your outgoing announcement
leave messages in
leaving several seconds of blank time at
Mailbox 2 or 3:
the end of your announcement to allow
callers enough time to select a mailbox.
57
IN CASE OF DIFFICUL
TY
IN CASE OF DIFFICUL
TY