Campbell Scientific RF320-Series Ritron VHF/UHF Radios - Manual (Page 10)

RF320-Series Ritron VHF/UHF Radios
ƒ The installation manual should provide specific information of how to
install the antennas to facilitate recommended operating distances to
all potentially exposed persons.
Contact Information
For additional information on exposure requirements or other information,
contact Ritron at (317) 846-1201 or
www.ritron.com .
2.2.5 FCC Label
An FCC label must be visible on the unit as installed in its final configuration.
If the DTX-445 is to be installed in an enclosure, the installer must ensure that
either the FCC label on the unit is visible through a door, window or other
opening, or add a label to the outside of the enclosure. If a label is to be added
to the outside of the enclosure, the label must be of a type which is not easily
removed or damaged and contain wording: Contains FCC ID: AIERIT17-
445. Or in the case of DTX-145: Contains FCC ID: AIERIT17-145.
3. Initial Inspection
Upon receipt of the RF320-series radio, inspect the packaging and contents for
damage. File damage claims with the shipping company. Immediately check
package contents against the shipping documentation. Contact Campbell
Scientific about any discrepancies.
Model numbers are found on each product. TABLE 3-1 correlates RF320-
series model numbers to Ritron DTX-145/455 transceiver model numbers. On
cables, the model number is often found on the connection end of the cable.
Check model information against the shipping documents to ensure the
expected products and the correct length of cables were received.
TABLE 3-1. RF320 Series Model Numbers to Ritron Model Number
RF320 Series
Model Number Ritron
Model Number
Operating Frequencies
RF320 DTX-145-OBNE 136 to 174 MHz
RF321 DTX-445-GBNE 400.5 to 416.5 MHz
RF322 DTX-445-HBNE 411 to 429 MHz
RF323 DTX-445-OBNE 450 to 470 MHz
4