Avanti FF431PS - Manual (Page 9)

9
 Temperature Control Panels
 Setting the Temperature Control
• To control the internal temperature, adjust the control dials according to the ambient temperature or
purpose of use.
• The first time you turn the unit on, set the temperature control to “COLDER” in refrigerator section
and “COLDER” in freezer section.
• The range of the temperature control is from position “COLD” the warmest to “COLDER” the coldest
in refrigerator section and from position “COLD” the warmest to “COLDER” the coldest in the
freezer section. After 24 to 48 hours, adjust the temperature control to the setting that best suits
your needs. The setting of “
•
” in refrigerator section and “
•
” in freezer section should be correct for
home or office refrigerator use.
NOTE:
 IF THE UNIT IS UNPLUGGED, HAS LOST POWER, OR IS TURNED OFF, YOU MUST WAIT 3
TO 5 MINUTES BEFORE RESTARTING THE UNIT. IF YOU ATTEMPT TO RESTART BEFORE
THIS TIME DELAY, THE REFRIGERATOR-FREEZER WILL NOT START.
OPERATING YOUR APPLIANCE
REFRIGERATOR FREEZER