AT&T 146 - Manual (Page 19)

If, for any reason, you need to know the pinouts for the modular jacks on the PagePac 6 or PagePac 6
Port Saver, pinout information is given below.
PagePac 6 PAGE Jack
Pin* Cord Lead† Function Connect to Paging Port
1 Not Used Not Used Not Used
3
4
5
6
2
Black Access Control (C) Dry Contact Closure (C)
Red Ring Ring
Green Tip Tip
Yellow Access Control (C1) Dry Contact Closure (C1)
Not Used Not Used Not Used
*Pins numbered from left to right, as seen when looking into jack.
†When using a standard modular cord.
Note: A telephone system paging port dry contact closure is required to connect pins 2 and 5 of
the PAGE jack together to access paging.
PagePac 6 Port Saver C.O. LINE and PHONES Jacks
Pin* Cord Lead† Function Connect to Line Jack
1
2
3
4
5
6
Not Used Not Used Not Used
Not Used Not Used Not Used
Red Ring Ring
Green Tip Tip
Not Used Not Used Not Used
Not Used Not Used Not Used
*Pins numered from left to right, as seen when looking into jack.
†When using a standard modular cord.
17