NoiseHush N620 Bluetooth Hands-free Speakerphone User Manual

Page 5

3. Pair the second phone to the N620 using the

pairing instructions above.

phone.

5. Select “NoiseHush N620” on your phone list of

Both phones are now paired to the N620.

Using the Multipoint feature between phones:

When connected to two bluetooth phones, the

phone. To answer a call from the secondary phone

while you are on a call on the primary phone,

please do the following;

1. Press the MFB once and you will be switched

to the secondary phone while the primary

phone goes on stand-by mode.

2. Press the MFB button again to switch back to

your previous phone call with the primary

phone. You may repeat this as needed to switch

back & forth between phones.

• Rejecting a call: Press and hold the MFB for 3

seconds during an incoming call.

• Redialing the last number: In stand-by mode,

press the MFB twice.

• Adjusting volume: Press the + and – buttons to

adjust the speaker output volume.

• Mute/Unmute the microphone: During a call,

press and hold the Mute button for 3 seconds.

Repeat to unmute. When muted, the Bluetooth®

will beep twice every few seconds to indicate it

is muted.

• Transfer a call from N620 to phone: During

a call, press the + and – buttons simultaneously

for 3 seconds. Repeat this method as needed to

transfer between the phone and the N620.

• Using voice dialing:

If your mobile phone is voice dialing enabled,

press the MFB once and say the voice tag after

you hear a short beep.

Note: You must record voice tags into your