Kinivo WHD110 Wireless 5G HDMI Transmitter and Receiver System - Manual (Page 6)

Kinivo WHD110 Wireless 5G HD AV Kit 6
Installation
1. Transmitter
1. Place the Transmitter (TX) near the HDMI input device (Media player, gaming console, cable box, etc.)
2. Connect the HDMI input device to the HDMI IN port of the Transmitter using an HDMI cable.
3. If you want to control your input device using IR remotes, connect the included IR extension cable to the IR port on
the Transmitter and place the receiving end of the IR cable near the IR receiver of your HDMI input device (typically
in front of the device).
Wireless HDMI Transmitter Unit (TX) Wireless HDMI Receiver Unit (RX)
I R Extension Cable
HDMI Input
HDMI Input device
(DVD Player,
gaming console,
cable/satelite box etc.)
HDMI Output device
(HDTVs, Monitors,
Projectors etc.)
HDMI Output
Video Format Support TV: 1080p, 1080i, 720p, 576p, 480p PC: up to 1920x1080
Audio Format Support PCM, DTS, DOLBY DIGITAL
RF Communication System MIMO
Modulation OFDM
Image Delay < 1ms
Antenna High Performance Internal Antennas
Operating Frequency 5.1GHz to 5.9GHz
Maximum Transmission Power 12dBm ±2dBm
IR Carrier Modulation Frequency Support 38kHz
Power Supply AC Input 100~240V, DC Output 5V
Operation Temperature 32 0 F to 104 0 F