Kinivo WID340 300 Mbps Dual Band Wireless N USB Adapter - Manual (Page 4)

Kinivo WID340 Dual Band Wireless N USB Adapter 4
Linux 2.6 or newer
Mac OS X 10.5 or newer
Operation
To use the WID340 Wireless-N USB Adapter, simply plug the device into an available USB slot on the computer
or laptop.
If the drivers have not been loaded previously, continue by installing the drivers for your respective operating
system (see the following sections).
Note: Under normal operation, the WID340 LED indicator will turn on when plugged in. When the adapter is in use,
the LED indicator will blink.
1. Windows Installation (XP, Vista, 7)
Note: You will be required to restart your computer after installing.
1. Insert the Kinivo Software CD and run the setup when prompted. Alternatively, you can download the
drivers from support.kinivo.com.
2. Click Install to start the installation process.
3. Accept the agreement and press Next.
4. Click Install to continue.
5. The installation process will happen. It may take several minutes depending on the speed of your
computer.
6. When the process is complete, select Yes, I want to restart my computer now. Then press Finish.
7. After the computer has restarted, the driver installation is complete.