Samlex America Steca_Solarix_PRS - Manual (Page 8)

Load cannot be
operated
+
info LED flashes
red
+
. green LED
flashes
load output is switched off
due to excessive battery
voltage
• the load output automatically
switched on again as soon as
the battery voltage lies within
the permissible range
incorrect grounding • check the grounding 
external charging source is
not voltage-limited
• check the external charging
source
if necessary, switch off exter-
nal charging sources


Load cannot be
operated
+
info LED illumi-
nates green
defective load or installation
error
• connect load correctly

replace load 
Battery is not
charged
solar module not connected • connect the solar module

solar module connected with
incorrect polarity
• connect the solar module
with the correct polarity

short circuit at solar module
input
• correct the cause of the short
circuit

incorrect solar module
voltage
• use a solar module of the
specified voltage

solar module defective • replace the solar module

Battery display
jumps quickly
large pulse current • tune the current consump-
tion to match the battery
capacity

battery is defective • replace the battery 
8