Samlex America SDC-60 - Manual (Page 3)

SPECIFICATIONS
CAUTION! : THERE IS NO ISOLATION BETWEEN THE INPUT AND THE OUTPUT.
INPUT AND OUTPUT HAVE A COMMON NEGATIVE
Input to output isolation Not isolated. Input and output connections have a common negative
Input voltage 20 to 35 VDC
Output voltage 13.8 VDC ± 0.1 V
Output voltage regulation Less than 3%
Input current at no load 50 mA
Output current
Continuous 60
A
Current limit * 70 A
*Note: In current limit condition, the output voltage will drop if the
current drawn increases beyond the current limit value of 70 A
Output ripple and noise
less than 50 mV RMS
Efficiency Approx. 92%
Operating ambient temperature - -20 to +30 o C (derate linearly to zero at 70º C)
Humidity Max. 95%, non condensing
Protections:
-
Overload By current limiting
- Cooling Temperature controlled fans
- Over heating Drop in output voltage
- Reverse polarity Fuse protection
- Over voltage Varistor (also protects against load dump)
Input side fuses 60 A (2 pieces of 32V, 30A in parallel)
Safety and EMC Standards:
-
Emission EN50081-1
- Immunity EN50082-1
- Automotive directive 95/45/EC
Input / output connections Terminal Block - M6 Bolt and Nut
Weight 2.6 lbs / 1.2 Kg
Dimensions (H x W x D) 3.5” x 3.6” x 7” / 90 x 93 x 177mm
Warranty 2 years
NOTE: Specifications are subject to change without notice
Samlex America Inc.
110-17 Fawcett Road
Coquitlam BC Canada V3K 6V2
Telephone: (604) 525-3836 SDC60-August2006