Samlex America SDC-30 - Manual (Page 3)

SPECIFICATIONS
CAUTION! : THERE IS NO ISOLATION BETWEEN THE INPUT AND THE OUTPUT.
INPUT AND OUTPUT HAVE A COMMON NEGATIVE
Input to output isolation Not isolated. Input and output connections have a common negative
Input voltage 20 to 32 VDC
Output voltage 13.8 VDC ± 0.1 V
Output voltage regulation Less than 3%
Input current at no load 25 mA
Output current
Continuous 30
A
Current limit * 35A
*Note: In current limit condition, the output voltage will drop if the
current drawn increases beyond the current limit value of 35 A
Output ripple and noise
less than 50 mV RMS
Efficiency Approx. 92%
Operating ambient temperature - -20 to +30 o C (derate linearly to zero at 70º C)
Humidity Max. 95%, non condensing
Protections:
-
Overload By current limiting
- Cooling Temperature controlled fan
- Over heating Drop in output voltage
- Reverse polarity Fuse protection, 30 A
- Over voltage Varistor (also protects against load dump)
Input side fuse 30 A (inside the unit)
Safety and EMC Standards:
-
Emission EN50081-1
- Immunity EN50082-1
- Automotive directive 95/45/EC
Input / output connections Terminal Block - 6.3 mm male flat tab, quick connect
Weight 1.5 lbs / 0.6 Kg
Dimensions (H x W x D) 1.9” x 3.5” x 5.9” / 49 x 88 x 151 mm
Warranty 2 years
NOTE: Specifications are subject to change without notice
Samlex America Inc.
110-17 Fawcett Road
Coquitlam BC Canada V3K 6V2
Telephone: (604) 525-3836 SDC30-August2006