Samlex America SEC-100BRM-220 - Manual (Page 4)

IMPORTANT SAFETY INSTRUCTIONS
Please read before using your power supply.
CAUTION !
ALL ELECTRICAL INSTALLATIONS MUST MEET LOCAL AND NA-
TIONAL WIRING CODES AND SHOULD BE PERFORMED BY A QUALI-
FIED ELECTRICIAN
.
OPERATION OF COOLING FAN
THE HEAT PRODUCED IS EXTRACTED BY FORCED AIR COOLING. IN CASE
ANY OF THE FANS FAILS, LIGHT AND SOUND ALARMS WILL BE ACTIVATED.
IMMEDIATELY SWITCH OFF THE POWER TO THE UNIT TO PREVENT DAMAGE
DUE TO OVER HEATING
CONNECTION TO AC OUTLET
THE POWER SUPPLY SHOULD BE OPERATED ONLY FROM A STANDARD 2
POLE, 3 WIRE GROUNDING RECEPTACLE.
DO NOT CONNECT TO A 2 POLE, 2 WIRE RECEPTACLE THAT
HAS NO GROUNDING
.
REPLACEMENT OF POWER CORD PLUG
THE POWER CORD IS PROVIDED WITH A MOULDED, STANDARD EUROPEAN
2 POLE, 3 WIRE GROUNDING PLUG (“SCHUKO”—250V, 16A), THE PLUG MAY
BE REPLACED TO SUIT A DIFFERENT SUITABLE RECEPTACLE.
CAUTION ! REPLACEMENT SHOULD BE DONE BY A QUALIFIED ELEC-
TRICIAN. PLEASE ENSURE PROPER POLARITY OF THE CONNECTIONS AS
FOLLOWS :
“ L ” LINE
BROWN
“ N ” NEUTRAL BLUE
EARTH GROUND GREEN WITH YELLOW STRIPE
DO NOT USE EXTENSION CORD UNLESS ABSOLUTELY NECESSARY. IF AN
EXTENSION CORD MUST BE USED , MAKE SURE :
1. THE PINS ON THE EXTENSION CORD'S PLUG ARE OF THE SAME NUM-
BER, SIZE AND SHAPE AS THOSE OF THE PLUG OF THE POWER SUPPLY
CORD. NEVER USE AN EXTENSION CORD THAT HAS NO GROUNDING
CONNECTION
2. THE EXTENSION CORD SHOULD BE RATED FOR 250 V, 16A.
1.