Avanti WCR534WDZD N User Manual

Page 9

background image

9

OPERATING YOUR WINE CHILLER

It is recommended you install the Wine Chiller in a place where the ambient temperature is between
72-78 degrees Fahrenheit. If the ambient temperature is above or below recommended
temperatures, the performance of the unit may be affected. For example, placing your unit in extreme
cold or hot conditions may cause interior temperatures to fluctuate. The range of 40-65 degrees
Fahrenheit may not be reached.

Recommended Temperatures for Chilling Wine

.


Red Wines

58 - 65 ºF

14 - 18 ºC

Dry / White Wines

48 - 57 ºF

10 - 13 ºC

Rose Wines

49 - 51 ºF

9 – 11 ºC

Sparkling Wines

40 - 47 ºF

5 - 8 ºC

ON/OFF POWER

To turn ON or OFF the appliance, press the ON/OFF button .

SETTING THE TEMPERATURE CONTROL

You can press SET button to control the internal temperature for each zone.
The degrees indicators will appear in the display windows marked TOP ZONE and BOTTOM ZONE.
• Press the SET button once.

The LED indicator on the TOP ZONE display will flash. Then press the UP

or DOWN

buttons to get the desired temperature in the top zone.

• When you press the SET button again, the LED indicator on the BOTTOM ZONE display

will flash. Then proceed to press the UP

or DOWN

buttons to get the desired

temperature in the bottom zone.

• The temperature that you desire to set will increase 1ºF or 1ºC if you push the UP

button

once, on the contrary the temperature will decrease 1ºF or 1ºC if you push the DOWN

button

once.


The temperature range of TOP ZONE is 40 ~ 55ºF/ 5 ~ 13ºC which is suitable for storing sparkling
and white wines. The temperature range of BOTTOM ZONE is 55 ~ 65 ºF/13 ~ 18ºC which is suitable
for storing white and red wines.
• When you store mostly red wines, you should store them in the BOTTOM ZONE, the temperature

which you control needs to be set at between 58 to 65

°F/14 to 18ºC and the red LED lamp

marked “RED” will be lit

The LED readout will show the original temperature set previously (the preset temperature at the
factory for TOP ZONE is 45ºF/7ºC and for BOTTOM ZONE is 55ºF/13ºC).

You can select temperature display setting from Fahrenheit to Celsius degree by pushing the ºF/ºC

button. Fahrenheit or Celsius degrees indicators will appear in blue color in the temperature

display windows for each zone.

This manual is related to the following products: