Weems and Plath Weems Chrome Stormglass with display User Manual
Page 3
. Unscrew the base from the
Stormglass.
. Mount the base to a wall or
plaque by inserting the enclosed
self-tapping screw into the base
(screw head nests inside the base)
and screwing it into the wall/
plaque.
. Find the “mounting accessory”
(in the packaging - it has an internally
threaded ring attached to an externally
threaded post) Carefully screw the accessory’s
post into the mounted base until snug. You may
need to rotate the mounted base slightly so the
Stormglass is vertical once mounted.
. Invert the Stormglass and carefully screw its
post into the accessory’s ring.
. Position the Stormglass at the
preferred viewing angle, then lock that
position by screwing the enclosed finial
(brass cap with threaded post) into the
top of the accessory until snug. (Caution: If you
plan to unscrew it in the future, don’t tighten
the finial too much).
. Enjoy your Weems Stormglass!
Wall or Plaque Mounting:
Available as an engraved plaque to accompany Stormglass