iPazzPort KP-810-02 - Manual (Page 7)

6. Switch between upper-case and lower-case input mode: If you are in lower-
case input mode, press key This way you can turn to upper-case
input mode , LED 5 will blink at an interval about 1 second. In order to return
to lower-case input mode pressing the key again after you completed your
upper-case input, the LED 5 goes out. Every time, completed your upper-
case input, please switch to lower-case input mode immediately, if waiting for
the device enters sleep mode, LED 5 status will be incorrect.
7. When LED 4 lights up this indicates your battery voltage has a low charge and
needs to be recharged. The Wireless Handheld Keyboard and Mouse
Touchpad is equipped with a re-chargeable battery. We have supplied you
with a USB cable, which is plugged into a vacant USB slot on your computer
and the bottom of the Wireless Handheld Keyboard and Mouse Touchpad,
as indicated by arrow 8 above. During charging LED 1 & 2 will light up with a
steady on. When fully charged LED 1 will turn off. Please unplug the
Wireless Handheld Keyboard and Mouse Touchpad from the USB cable.
LED 2 will then turn off and your battery is now fully charged.
8. The Wireless Handheld Keyboard and Mouse Touchpad can work with a
low battery charge (LED 4 only lit up) but if LED 3 and LED 4 are both lit up
you should re-charge battery as described above. The backlight feature of
the keyboard draws more power so take care when you battery indicators
both light up. The unit becomes unstable when the battery lights are both on.
9. If you wish to operate this Wireless Handheld Keyboard and Mouse
Touchpad in a darkened room then you will want to use the Backlight
Keyboard feature. In order to activate the Backlight feature please double
press.
10. The Touch Mouse Pad (TMP) is quite versatile. To create input with the
TMP place your finger on the pad. Just move your finger on the TMP as