beautypg.com

Technical data, Installation, Closing the door – AEG AGN71800F0 User Manual

Page 14: Positioning

background image

Problem

Possible cause

Solution

Upper or lower square is

shown in the temperature

Display.

An error has occurred in meas-

uring the temperature.

Call your service representative

(the cooling system will continue

to keep food products cold, but

temperature adjustment will not

be possible).

dEMo appears on the Dis-

play.

The appliance is in demonstra-

tion mode (dEMo).

Keep pressed approximately 10

sec. the OKbutton since a long

sound of buzzer is heard and the

Display shut off for a short while:

appliance start works regularly.

Closing the door

1.

Clean the door gaskets.

2.

If necessary, adjust the door. Refer to "Installation".

3.

If necessary, replace the defective door gaskets. Contact the Service Center.

TECHNICAL DATA

Dimension of the recess

Height

1780 mm

Width

560 mm

Depth

550 mm

Rising Time

21 h

Voltage

230-240 V

Frequency

50 Hz

The technical information are situated in the rating plate on the internal left side of the

appliance and in the energy label.

INSTALLATION

Positioning

WARNING!

If you are discarding an old appliance that has a lock or catch on the door, you must ensure

that it is made unusable to prevent young children being trapped inside.

The appliance shall have the plug accessible after installation.

Install this appliance at a location where the ambient temperature corresponds to the cli-

mate class indicated on the rating plate of the appliance:

14

Technical data

This manual is related to the following products: