Avanti REFRIGERATOR RA758WT - Manual (Page 7)

7
Important Safety Instructions

WARNING

To reduce the risk of fire, electrical shock,
or injury when using your appliance, follow
these basic precautions:

Read all instructions before using the appliance.

DANGER or WARNING: Risk of child entrapment.

Child entrapment and suffocation are not problems of the past. Junked or
abandoned appliances are still dangerous. . . even if they will “just sit in the garage a
few days.”

Before you throw away your old refrigerator or freezer: Take off the doors.
Leave the shelves in place so that children may not easily climb inside.

Never allow children to operate, play with, or crawl inside the appliance.

Never clean appliance parts with flammable fluids. The fumes can create a fire
hazard or explosion.

Do not store or use gasoline or any other flammable vapors and liquids in the vicinity
of this or any other appliance. The fumes can create a fire hazard or explosion.
-Save these instructions-
INSTALLATION INSTRUCTIONS
 Before Using Your Appliance
 Remove the exterior and interior packing.
 Check to be sure you have all of the following parts:
 1 Ice Cube Tray
 1 Plastic Scraper
 3 Door Bins
 1 Bottle Bin
 3 Refrigerator shelves
Wire shelves in Model RA758WT
Glass shelves in Model RA759PST
 1 Wire Freezer shelf
 1
Crisper
 1 Glass Crisper Cover
 1
Egg Tray
 Instruction
Manual
 Before connecting the appliance to the power source, let it stand upright for approximately 2
hours. This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
 Clean the interior surface with lukewarm water using a soft cloth.
 In case the interior accessories are not correctly placed, rearrange them as described in
chapter “Parts and Features”
 Installation of Your Appliance
 Place your appliance on a floor that is strong enough to support the appliance when it is fully
loaded. To level your appliance, adjust the legs at the front of the appliance.
 Allow 5 inches of space between the back and sides of the appliance, which allows the proper
air circulation to cool the compressor.
 Locate the appliance away from direct sunlight and sources of heat (stove, heater, radiator,
etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Extreme cold ambient temperatures may also cause the appliance not to
perform properly.
 Avoid locating the appliance in moist areas. Too much moisture in the air will cause frost to
form quickly on the evaporator requiring more frequent defrosting of the appliance.