Audiovox MMSV58 - Manual (Page 5)

2. Remove all accessories from the visor such as mirror/door/light assemblies, etc (if
applicable) and set aside for re-assembly.
Figure 3. Sun Visor With All Accessories Removed
3. Once all accessories are removed, check the dimensions and material depth of the sun
visor to estimate the fit for your application.
NOTE: If the visor had no accessories to remove and does not have a open cavity,
measure the thickness of the visor material between the rigid material in the center and
the surface.
Figure 4. Sun Visor With All Accessories Removed
4. Using the rear of the visor-mounting shroud as a template, mark the visor.
Shroud used as
template
Figure 5. Marking The Visor Material
4