Siemens hiDefinition 48 dBA Dishwasher - Manual (Page 8)

8
Loading the Bottom Rack
Place large items in the bottom rack. Load pots, pans and bowls upside-down. Figures 3
and 4 show typical mixed loads for the bottom rack.
Rack Accessories
Flip Tines
Flip Tines fold down to make loading the racks easier in some instances. Grasp the tines
and release from notch to reposition as shown in Figure 5.
Automatic Top Rack Height Adjustment
The top rack can be lowered to accommodate large items in the top rack, and raised to
make room for large items in the bottom rack.
To raise the top rack:
1. Pull the top rack out of the dishwasher until it stops rolling.
2. Grasp the top of the rack above the Automatic Height-Adjustable Top Rack handles
and pull it upward as shown in Figure 6 until the Automatic Height-Adjustable Top
Rack handles lock the rack into position (you do not need to press the Automatic
Height-Adjustable Top Rack handles in order raise the rack).
NOTE: Before you push the top rack back into the dishwasher, ensure that the rack height
is the same on both sides. Otherwise, the dishwasher door will not shut and the top rack
spray arm will not connect to the water circuit.
To lower the top rack:
1. Pull the top rack out of the dishwasher until it stops rolling.
2. Press the Automatic Height- Adjustable Top Rack handles inward as shown in
Figure 7 and let the rack drop.
Cup Shelves
In addition to cups, the shelves shown in Figure 8 can also hold large utensils. Grasp the
cup shelves and fold them down. Place cups upside-down on the cup shelves.
Figure 3
Figure 4
10 place setting bottom rack
12 place setting bottom rack