Service programmes – Siemens TE809501DE User Manual
Page 52
48
en
Service Programmes
Tip: Refer also to the quick reference guide
in the storage compartment
22.
At regular intervals, the display
5 shows the
following texts:
Short rinse milk system or
Service - descale or
Service - clean or
Service - calc‘nClean.
The appliance should be cleaned or descaled
immediately using the corresponding pro-
gramme. You have the option of combining
the processes
Descale and Clean with the
calc‘nClean function (see “ calc‘nClean”).
If the service programme is not run as
instructed, the appliance may be damaged.
¡
Warning!
Follow the instructions for using the descal-
ing and cleaning agents for each service
programme. Never interrupt the service
programme!
Do not drink the liquids.
Never use vinegar, vinegar-based products,
citric acid or citric acid-based products.
Never put descaling tablets or other descal-
ing agents in the powder compartment
18.
Before starting the respective service
programme (descaling, cleaning or
calc‘nClean), remove the brewing unit,
clean as instructed and replace.
Specially developed and suitable descal-
ing and cleaning tablets are available
from retailers or customer service (see
“Accessories”).
Cleaning the milk system
Duration: approx. 1 minute
Short rinse milk system
▶ start
The milk system
10 can be pre-cleaned
automatically.
● Press the
à
button
3.
Short rinse milk system ▶ start
● Press the
start button 8.
Place empty glass under milk frother and
place suction pipe in glass ▶ start
● Place an empty glass under the milk
system
10 and put the end of the pipe
10d in the glass.
● Press the
start button 8. The milk system
is cleaned automatically.
● Now empty the glass and clean the
suction pipe
10d.
In addition to this, clean the milk system
thoroughly at regular intervals (by hand or
in the dishwasher).