Acroprint Data Collection Terminal DC7000 - Manual

DC7000 Product specifications
• Display: 2 line by 20 character backlit LCD (alphanumeric).
• Memory:
Flash 1 Mbyte (Standard)
2 Mbyte (Optional)
SRAM
512 Kbyte (Standard)
1 Mbyte (Optional)
FRAM ( 10K transactions typical)
128 Kbyte (Standard)
256 Kbyte (Optional)
DATA Flash
512Kbyte Optional
• Power: 120/240V. 50Hz/60Hz wall mount transformer 9 volt AC, 1000 mA minimum.
• Battery Capabilities: Internal lithium battery powers the real time clock. Data is
retained in FRAM memory which does not require external power to maintain data.
• Media Input:
o Integral keypad.
o Magnetic Stripe Card Reader (ABAII). A Track 2 ABA magnetic badge reader is
standard
o Barcode Reader, Code 39, Interleaved 2 of 5, (visible or infrared).
o External Bar Code Reader.
o Pen Wand.
o Integrated Fingerprint Reader (CCD Technology) .
o Proximity badge reader: 125kHz RFID or HID Proximity Reader 26 Bit.
• Communications: RS232 (Standard), RS485 2 wire single terminal or multi-dropped
protocols (LAN), internal 56K-baud modem, or Ethernet/Internet TCPIP (RJ45),
10/100 BaseT.
• Printer Connection: Serial port RJ11 Modular, Parallel port 25 pin DB.
• Enclosure: Flame retardant Polycarbonate/ABS, with reversible wall mounting bracket
and secured access door that protects I/O ports.
• System Requirements: Works with Acroprint Pendulum system and custom software
applications.