Adjusting the grinding unit, Preparation using coffee beans – Siemens TE506519DE User Manual
Page 35
31
de
en
Level
Water hardness
German (°dH)
French (°fH)
1
2
3
4
1-7
8-14
15-21
22-30
1-13
14-25
26-38
39-54
Drink counter
: This displays how many
drinks have been dispensed since the appli-
ance was first put into operation.
Adjusting the
grinding unit
The rotary selector (3) adjusts the grind
settings from coarse to fine.
A
Warning!
Adjust the grinding unit only while it is
running! Otherwise the appliance may be
damaged� Do not reach into the grinding
unit�
● While the grinding unit is running, adjust
the rotary selector (3) from fine (
a: Turn
anticlockwise) to coarse (
b: Turn clock-
wise) as required�
a
b
Note: The new setting will not become
apparent until after the second cup of
coffee�
Note: If the message
Please adjust
grinding unit to coarser setting!
appears in the display, the grind setting
for the coffee beans is too fine. Adjust the
grinding unit to a coarser setting�
Tip: For dark roast coffee beans, choose a
finer grind, for lighter beans a coarser grind.
Preparation using
coffee beans
This fully automatic espresso machine
grinds beans freshly for each brew�
The appliance must be ready for use� To
prepare a coffeebased drink with milk, first
insert the milk tube into a milk container
and turn the rotary selector (6b) to “Milk
froth”
j
�
Important: Dried milk residue is difficult
to remove, so the milk frother (6)
must be
cleaned with lukewarm water immediately
after use and rinse using the
Clean milk
system
programme�
Tip: If possible, use only beans for fully
automatic coffee and espresso machines�
For optimal quality, deep-freeze the beans
or store in a cool place in sealed containers�
Coffee beans can be ground while frozen�
Important: Fill the water tank (17) with
fresh water every day� The tank (17) should
always contain sufficient water for operating
the appliance�
Preparation
1� Place the pre-warmed cup(s) under the
coffee outlet (7)�
Tip: For a small espresso, always
preheat the cup, e�g� using hot water�
2� Select the required coffee and the
required per-cup quantity by turning the
upper rotary knob (15)� The selected
coffee and the per-cup quantity are
shown in the display�
3� Select the required coffee strength by
turning the lower rotary knob (14)� The
selected coffee strength is shown in
the display� To prepare two cups at the
same time, press the
d
button (11)
(only for drinks without milk and without
the aromaDouble Shot function)�
4� Press the
start button (10)�