Apex Digital LD3249 - Manual (Page 24)

Menu Adjustments
In the SETUP menu you may adjust the position of images displayed on screen once you connect an input signal from your PC. Recom-
mended resolution is 1280 x 1024. If your PC system uses a standard signal mode, the screen will adjust automatically. Connect an optional
3.5mm audio cable for stereo sound. See page 14 for details.
How to Navigate:
After connecting to a
PC, press the INPUT button and highlight VGA, then press ENTER. Press the MENU button on the remote control and
navigate using arrow t u buttons to select SETUP. Gain access to position adjustment options by pressing the down q arrow button to
highlight Advanced, then press u arrow button to select from the following options.
• Highlight V-Pos. Navigate
using the t u arrow but-
tons to adjust the position
of images displayed up and
down.
• Highlight Clock. Navigate
using the t u arrow buttons
to control the width of the
image.
• Highlight H-Pos. Navigate
using the t u arrow but-
tons to adjust the position of
images displayed from side
to side.
• Highlight Auto. Press the u
arrow button to automatically
adjust the display to the best
setting. When prompted,
select Yes to confirm.
• Highlight Phase. Navigate
using the t u arrow buttons
to improve focus and image
stability.
When prompted, Select “Yes” to confirm.
Setup Menu
23 24