Siemens TE712501DE - Manual (Page 36)

32
en
Before using for the
first­time
General
Fill the water tank with pure, cold, uncar-
bonated water only and preferably use only
beans or coffee blends suitable for fully auto-
matic espresso and coffee machines. Do
not use coffee beans that have been glazed,
caramelised or treated with other additives
containing sugar, since they will block the
brewing unit.
The water hardness setting can be adjusted
on this appliance. The factory setting for the
water hardness is 4. Check the hardness
of the water you use with the enclosed test
strip. If a value other than water hardness
4 is displayed, change the setting on the
appliance accordingly after switching on
(see “Menu settings – Water hardness ”).
Setting up the appliance
● Place the fully automatic espresso machine
on a flat, water­resistant surface that can
take its weight.
Important: Only use the appliance in frost-
free rooms. If the appliance has been trans-
ported or stored at temperatures below
0 °C, wait at least 3 hours before operation.
● Pull out the mains plug from the cable
compartment 24 and plug it in. Adjust the
length of the cable by pushing it back in
and pulling it out. To do this, place the
appliance with its back flush with the edge
of the work surface and either pull the
cable downwards or push it upwards.
● Lift the lid of the water tank 12.
● Remove and rinse the water tank 11 and
fill it with fresh, cold water. Do not fill
above the “ max” mark.
● Replace the water tank 11 and push it
firmly downwards into place.
● Close the water tank lid 12 again.
● Fill the bean container 15 with coffee
beans.
● Press the power switch 1 O / I. The
start button 8 lights up and the different
languages appear in the display 5.
The following languages can be selected:
TE7.. DE
Deutsch English
Français Italiano
TE7.. RW
English Русский
Nederlands Français
Italiano Svenska
Español Polski
Українська Magyar
Türkçe Dansk
Norsk Suomi
Português Čeština
Ελληνικa
● Use the buttons < and > 4 to select the
language in which you want the display
texts to appear.
The selected language is highlighted.
● Press the start button 8. The language
you selected is saved.
● The brand logo lights up in the display 5.
The appliance now heats up and rinses.
Some water will run out of the coffee
outlet 9.