Siemens TE809F01DE - Manual (Page 36)

32
en
j button and settings
Use the j button 7 to display information
(press briefl y) and adjust settings (hold
down for at least 3 seconds).
Displaying information
The following information can be displayed
in the Info menu:
● when should the next service be
completed.
● how many drinks have been dispensed
since the espresso machine was
switched on.
● Press the j button 7 briefl y and navigate
with the < and > buttons 4.
Info
Descale after 150
Clean after 200
Change filter in 200
*
Info
No. of coffees 11
No. of milk mixes 15
Amount hot water 2 l
* appears only if the fi lter is activated.
Press the j button 7 briefl y to return to the
drink selection. If no button is pressed for
about 10 seconds, the appliance automati-
cally switches back to drink selection mode.
Adjusting settings
See “Menu settings”.
Adjusting the grinding unit
The rotary selector 17 adjusts the grind
settings from coarse to fi ne.
¡ Warning!
Adjust the grinding unit only while it is run-
ning! Otherwise the appliance may be dam-
aged. Do not reach into the grinding unit.
● While the grinding unit is running,
adjust the rotary selector 17 from
fi ne ( a: Turn anticlockwise) to
coarse ( b: Turn clockwise).
a b
Info: The new setting will not become
apparent until after the second cup of
coffee.
Note: If the message Adjust the grinding
unit to a coarser setting appears in the dis-
play, the grind setting for the coffee beans is
too fi ne. Adjust the grinding unit to a coarser
setting.
Tip: For dark roast coffee beans, choose a
fi ner grind; for lighter beans a coarser grind.
TE809F_MK.indb 32 08.05.2013 12:13:01