Matrix Orbital PK162-12 - Manual (Page 35)

Command Syntax Default Notes
Underline cursor off FE 4B
254 75
254 ’K’
R Turns off the un-
derline cursor.
Blinking cursor on FE 53
254 83
254 ’S’
On R Turns on the
blinking block
cursor.
Blinking cursor off FE 54
254 84
254 ’T’
R Turns off the
blinking block
cursor.
Cursor left FE 4C
254 76
254 ’L’
Moves the cur-
sor one position
to the left. If the
cursor is already
at the beginning
of a line it will
move to the end
of the other line.
Cursor right FE 4D
254 77
254 ’M’
Moves the cur-
sor one position
to the right. If the
cursor is already
at the end of a line
it will move to the
beginning of the
other line.
7.5 Keypad Interface Commands
Table 18: Keypad Interface Commands
Command Syntax Default Notes
Auto repeat mode on FE 7E [0x00|0x01]
254 126 [0|1]
254 ’~’ [0|1]
Off R Applies to key-
pad only.0x00
= 200 ms type-
matic,0x01 =
key down/key up
codes sent.
Auto repeat mode off FE 60
254 96
254 ’‘’
Off R Applies to keypad
only.
Matrix Orbital PK162-12 31