Waterloo F1521A1-3 User Manual

Page 7

• Turn J over. (Use packaging material to avoid scratching.)
• Drill (6) 1/8" pilot holes 1/2" deep.

DD(6)

• Reposition J on unit.
• Attach with (6) DD.
• Reinstall drawers. (See drawer installation instructions.)

DD(6)

STEP 6 - Continued:

C Lubricate the slides with grease or equivalent, (twice yearly.)

C Periodically the drawer fronts, drawer trim and other surfaces

should be cleaned with a mild detergent and water.

C Auto wax will preserve the unit's luster finish. Apply the wax as

to a car. The wax will also help protect the unit against
scratches.

C Grease and oil can be removed with most standard cleaning

fluids. For safety, use a nonflammable cleaning fluid.

• Empty the drawer.
• Fully extend the drawer.

Release

• To reinstall, carefully align

the slides and slowly push
the drawer into the unit until
the drawer stops.

Lever Style - Lift or lower (depending on the
slide) the release lever on both sides, (this
allows the slides to ride over the stops.) Pull
out to remove.

Tab Style - Depress the release tabs on
both sides, (this allows the slides to ride over
the stops.) Pull out to remove.

REMOVING AND INSTALLING DRAWERS:

OPERATION

MAINTENANCE