Parts identifier (not to scale), Fig 1, Step1 – On the Edge Marketing Shuffleboard Table #900351 User Manual
Page 2
H 3
H3
P1
P2
P4
P3
1
P3
FIG 1
HI - M8X32 mm
Bolt(12)
H2 - M8 W asher
(12)
H4 - 3.5x18 mm
Flat Head Screw
(4)
H3 - 3.5x30 mm
Washer Head Screw
(24)
H6 - M8 Allen
W rench(1)
PI - Left Leg
(2)
P2 - Right Leg
(2)
P4 - Leg Leveler
(4)
P3 - Leg Brace
(4)
P5 - Scorer
(2)
PARTS IDENTIFIER
(Not To Scale)
Step1
H5 - 3.5x12 mm
Flat Head Screw
(8 )
P6-Drink Hol
der
(2)
P8-Blue shuffleboard
Puck
(4)
P7-Shuffleboard
Dust
(1)
P9-Red shuffleboard
Puck
(4)
Place the Leg Leveler (P4) on a flat surface and connect the Right Leg (P2) as indicated in
Figure 1. Repeat for the Left Leg (P1). Then place the two connected pieces opposite to each
other. Next connect two pieces of Leg Braces (P3) to the legs by inserting 12 Washer Head
Screws (H3) (6 on each piece of Leg
Brace). Repeat for second leg of the
shuffleboard table.