Nilfisk-ALTO S-6 - Manual (Page 14)

13
Modification on mono and stereo channels
6. FOR THE EXPERTS WHO WANT TO KNOW MORE
Before
Disconnect
the POST route
Aux
(PRE)
POST
After
Aux
(PRE)
POST
Solder the PRE route
As we have told you previously in this Manual, the Aux Send Control both on Mono and stereo channels is factory wired
as POST-FADER. If you have some skill in electronic components soldering you can modify this setting and have all
your AUX sends configured as PRE-FADER.