AMICA 1143.4TfYDX EN - Manual (Page 13)

13
OPERATION
Switching on the appliance and selecting
language.
After connecting the appliance to the mains,
electronic programmer starts in menu: setup
/ language.
Using the
sensor fields search the
contents of the language menu. Touch
sensor field to select the highlighted langu-
age in which you want the messages to be
displayed.
When mains power is cut and restored (loss
of power), electronic programmer automa-
tically goes into standby and immediately
displays the current time.
Set current time.
Once language is selected, confirm the time
displayed on the display using the sen-
sor field or change it using the sensor
fields.
Time can be set in the range from 0:00 to
23:59 for 24-hour clock system or from 0:00
to 12:00 for the 12-hour clock system.
When current time is set, electronic program-
mer goes into standby mode in which the
display shows the current time only.
To activate the appliance from standby and
set current time, touch the sensor field.
When menu is displayed, select “setup” using
the sensor fields and confirm by touch-
ing . Upon accessing the “time” menu using
the sensor fields, select “current time”
and confirm by touching .