AMICA Built-in refrigerators UC150.3 EN - Manual (Page 8)

8
INSTALLATION AND OPERATING CONDITIONS OF THE APPLIANCE
It is prohibited to readjust or modify
any parts of the unit. It is crucial not
to damage the capillary tube visible
in the compressor recess. The tube
may not be bent, straightened and
wound.
If the capillary tube is damaged by
the user the guarantee will be void
(fig. 2).
Mains connection
Before the appliance is connected to the
mains, set the adjustment knob to the
“0” position.
l The appliance should be connected to AC
230V, 50Hz supply socket. The socket must
be fitted properly and must be supplied with
an earthing conduit and 10 A fuse.
l The earthing of the appliance is required by
the law. The manufacturer will not be held li-
able for any damage, which can be incurred
by persons or objects as a consequence of
the failure to fulfil the requirement imposed
by this regulation.
2
capillary
tube
l The data is provided on the rated plate
located at the bottom of the wall inside the
chamber.
3
This appliance must be earthed
The flexible cord (mains lead)
fitted to this appliance has three
cores for use with a 3-pin 13-amp
plug. If a BS 1363 (13-amp) fused
plug is used, it should be fitted
with a 13-amp fuse.
Important
The cores in this mains lead are coloured
in accordance with the following code:
GREEN-AND-YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
These colours might not correspond with
the colour markings identifying the termi-
nals in your plug.