Pump head of greater than 1m – AEG KO-LAVAMAT 74335 User Manual

Page 47

Text mode
Original mode

Installation and connection instructions

If you intend the drain hose from
the washing machine to empty
into a sink, make sure that the
sink is empty and the plug hose
is not blocked. Use the plastic
“U-Piece“ supplied.

Important! The end of the
drainage hose must not be
submerged in the pumped-out
water. Otherwise, the water
could be sucked back into the ap-
pliance.

Pump head of greater than 1m

Every washing machine includes a wash water pump for the removal of
wash and rinse water, which can pump fluids through the outlet hose
up to a height of 1m, measured from the surface on which the machine
stands.

For pump heads of greater than 1m please contact your local
AEG Service Force Centre.