Microlab Pro 1 - Manual (Page 3)

15. Attachments - Do not use attachments not recommended by the product manufactures, as they
may cause hazards.
16. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket or table. The
product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only
with a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. Any
mounting of the product should follow the manufacturer's instructions and should use a mounting
accessory recommended by the manufacturer.
17. Moving the product - A product and cart combination should be moved with care. Quick stops,
excessive force and uneven surfaces may cause the product and cart combination to overturn.
18. Unused periods - The power cord of the appliance should be unplugged from the outlet during
lightning storms or when the apparatus is left unused for a long period of time.
19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20. Please remove the power plug form the main power source or wall power source when not in use.
When plugged in to a power source, the system is in standby mode, so the power is not entirely cut off.
21. Replacement parts - When replacement parts are required, ensure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
22. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and
rating. The correct fuse specification for each voltage range is marked on the product.
23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If
you do, the speaker may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from the power supply is by removing the
power cord from the wall outlet or the product. The wall outlet or the power cord entry to the product must
remain freely accessible at all times while the product is in use.
25. Try to install the product near a wall socket or extension cord and shall be easily accessible.
26. The highest environmental temperature suitable for this product is 40°C.
EN
3 Introduction
Stereo bookshelf system with separate amplifier for excellent sound handlings and wooden cabinets for
full range sound production. Pro series for audiophiles appreciation, specially designed stereo speakers
with standalone amplifier. Perfect for quality audio enjoyment, built with beautiful wood cabinets for
excellent sound.
High fidelity bookshelf design, perfect for most listening environment and entertainment. Full range audio
production with high quality woofers and tweeters in 2-way configurations.
Standalone amplifier for distortion free audio production without interferences. Comes with front panel
display and remote control.
Features
Professional series with beautiful wood finishes
Powerful and uncoloured audio performances with high fidelity resolutions
Standalone amplifier for distortion and clear acoustics
Stereo system with full range spectrum and 5.25" deep bass
Wireless remote control ideal for movie and music entertainment
Packing list
You should find following items while unpacking:
Illustrations
Front View
Product connection and operation
Connections
1.Connect the right satellite and left satellite to the audio output sockets at the rear of the amplifier.
2.Connect the 2RCAof the signal cable to the INPUT 1 sockets on the rear panel of the amplifier.
Insert the opposite end, 3.5mm plug to any playback media devices such as Mp3, Mp4, CD/DVD
player, and PC sound card.
3.Ifthe playback media device uses RCA sockets, such as in DVD, VCD players, use a third party
2RCA- 2RCAsignal cable to connect to the amplifier's input.
4.Lower all volume levels and connect the power plug to the AC power source outlet.
Operation
A. Manual
1. Depress the power button in the front panel and the system will go to
standby mode.
2. Ensure the volume level is set minimum.
3. Depress the INPUT SEL button to select between PC and AUX
connections.
4. Start the playback devices and adjust the volume to your preferred level.
EN
4
Front view
1. LED status panel
2. Input select button
3. Master Volume Knob
The master volume could be adjusted either
manually or remote control
4. Power button
1
2
3
4
PRO1 stereo speakers 2pcs
PRO1 amplifier 1pc
3.5mm stereo - 2RCA cable (1.8m) 1pc
2RCA - 2RCA cable (1.8m) 1pc
Interconnect speaker cable 2pcs
Wireless remote control 1pc
Battery 2pcs
User manual 1pc
Amplifier
AC power supply:
220V-240V~ 50Hz
Right Left
PC or Notebook Mp3 / Mp4 Media player
CD / VCD / DVD
player
Remote Control