U.S. Products PEX 500 - Manual (Page 8)

A-8 / ENGLISH
A-8 - FORM NO. 56091020 - PEX 200, 500
KNOW YOUR SWITCH PLATE
A Solution Pump Switch - This switch turns the solution pump ON and OFF.
B Vacuum
Switch - This switch turns the fi rst of the two vacuum motors ON and OFF.
C Vacuum Switch - This switch turns the second of the two vacuum motors ON and OFF.
D Circuit Indicator - When this light is on, it indicates that the two cords are on a separate circuit.
CAUTION!
The circuit breaker in the wall panel can trip if both cords are on the same circuit.
E Heat Switch - This three position switch controls the water temperature. Position (I) is low temperature, Position (O) is OFF and Position (II) is
high temperature.
A
B
C
D E