Burr King 1400 Series Arm Attachments User Manual
Page 7
keep applied force below 5 pounds for very small wheels. Larger wheels have larger bearings, turn
slower and will tolerate higher applied loads.
8. Where heavier grinding is desired use harder and/or serrated nose wheels. Burr King can help you
with the best wheel selection. Burr King can supply nose wheels from 3/8 inch to 3 inches in diameter
and from 1.2 to 2 inches wide. Nose wheels require the use of the proper support extension.
9. Use different front extensions for access to close corners, cavities, or special grinding needs. Burr
King can help you select the best front section for your 14xx attachment.
10. Maintain the 14xx attachment, and the mounted machine in clean, serviceable condition. Assure all
pinch guards, and other guards on the attachment and mounted machine are serviceable and used.
Burr King Manufacturing will help you with all of your finishing needs. If you have an application
problem, or need other assistance please contact us at any of the indicated phone numbers or at
WWW.burrking.com . Thank you for choosing Burr King products!
Figure 1: SAFETY GUARD SHOWN OPEN FOR CLARITY. DO NOT OPERATE WITH SAFETY
GUARD OPEN
See our catalog at
www.burrking.com
Contact us at
DOC1400-99 06/01
3