Burr King Model 482 User Manual
Page 11
See us at
www.burrking.com
contact us @
DOC 482OP-99 06/99
3
Remember for operator safety and the continued effectiveness of your model 482:
Do not defeat the safety guards and other safety provisions of the model 482.
Do not operate the model 482 with the safety guard open or the contact wheel guard/platen assembly
(or internal grinding attachment) removed.
Do not reach inside the safety guards while the machine is running. To do so is hazardous.
Do not use fluids in your grinding process unless your model 482 is designed for liquid operation
(NEMA 4, 4X). To do so may create an electrical safety hazard.
Do not use your model 482 to grind/polish explosive materials such unless it is equipped with
explosion proof electrical devices and motor.
Do not mix alloys in your grinding. To do so may create an explosion hazard.
Do not use stone or vitreous wheels on the model 482. To do so will create an operator safety hazard.
Do use eye, hand, face, arm, leg, feet and body protection that is adequate to protect against flying
debris, forcibly ejected work pieces, broken abrasive belts, etc.
Do train operators and others in safe operating practices.
Post these or equivalent instructions such they are available for ready operator reference.
Burr King Manufacturing can help you with problem solutions, and/or answers to your questions. Please call your Burr King
distributor first. If you can not reach satisfactory conclusion please call the Burr King factory, telephone 1-660-438-8998.