Phottix Strato TTL for Nikon - Manual (Page 11)

11
INSTRUCTION MANUAL EN
pressing the camera shutter button will not
illuminate the AF assist light of flashes.
Please Note:
AF-ILL functions can be set on or off in the
flash custom functions menu. (Please refer to
your flash manual for setting details.
Auto FP High Speed Sync
High Speed Sync functions, with a maximum
shutter speed up to 1/8000 sec., are support
by the Phottix Strato TTL when used with
cameras and flashes offering this function.
1. Auto FP High Speed Sync cannot be set on
the Strato TTL Transmitter.
2. Auto FP needs to be set on the camera
– consult your camera manual for specific
menu settings.
Supp or te d Ca mera a nd Flash
Settings
The Phottix Strato TTL Trigger supports
functions that can be set in camera menus.
See your camera and flash manuals for full
details. Functions not available on a camera
body or flash cannot be used with the Strato
TTL system.
1 . D e p t h - o f Fi e l d P r e v i e w B u t t o n
(Modeling Flash): Pressing the Depth of Field
Preview Button on the camera (If available)
will causes flashes connected to receivers on
the same channel (with the function enabled)