Kenwood CAW2292-01 - Manual (Page 2)

1
3
5
7
8
9
2
4
6
Car with OEM head unit. Remove dashboard cover under
the steering wheel by pulling
towards seat (see arrrows).
Open the glove box and remove it
by pulling towards seat. Remove locknut from head unit.
(passenger side underneath the
dashboard)
Remove locknut from head unit
(driver‘s side underneath the
dashboard). Place the screw driver
BEHIND the frame as shown on the
picture Place the Double-DIN facia plate
at the dashboard, move metal
bracket into the facia plate.
Connect alle required circuit points
and wires. Push the double DIN
head unit until it snaps in. Place
plastic radio trim. Place back all
panels in reverse order.
Remove OEM head unit.
All installation work must be performed by a qualified professional installer only.
The manufacturer / dealer is not liable for any kind of incidential or indirect damages.
Mount the metal brackets with
the double DIN head unit The position of the copper
coloured holder can be adjusted
to your needs for perfect fit.
(see sample)