Kenwood CAW2094-18 User Manual
Page 2

1. Remove the head unit and the
pocket.
Special tools like radio release keys may
be required.
2. Remove the original brackets (mar-
ked with arrows) with appropriate
tools to clear space for the double
DIN frame.
3. Place the facia plate and the metal
frame on the dashboard.
4. Mount the metal brackets with the
double DIN head unit
The position of the copper coloured
holder can be adjusted to your needs
(see sample photo below)
5. Connect all required circuit points
and push the double DIN head unit
until it snaps in.
6. Place the trim frame to finish
installation.
This manual is related to the following products:
See also other documents in the category Kenwood Radio:
- TS-2000 (150 pages)
- CK 680 (36 pages)
- HES20 (8 pages)
- CK 740 (48 pages)
- CK 300 (48 pages)
- CK 280 (32 pages)
- KTC-HR100 (32 pages)
- SPECTRUM 870AV (4 pages)
- TK-5710/5810 (41 pages)
- TK-5710/5810 (44 pages)
- KDC-X998 (48 pages)
- KDC-X998 (100 pages)
- PKT-23K (2 pages)
- TK-2180/3180 (53 pages)
- TK-2180/3180 (2 pages)
- TK-5220/5320 (44 pages)
- TK-5410D (2 pages)
- KDC-X598 (74 pages)
- DNX891HD (56 pages)
- DNX891HD (145 pages)
- DNX891HD (38 pages)
- TK-7180H/8180H (33 pages)
- TK-7180H/8180H (2 pages)
- NX-200G/300G (59 pages)
- NX-200G/300G (2 pages)
- TK-2360/3360 (26 pages)
- TK-2360/3360 (2 pages)
- DNX891HD (37 pages)
- NX-700/800 (37 pages)
- TK-7150/8150 (23 pages)
- TK-7150/8150 (2 pages)
- DDX8901HD (76 pages)
- TK-3230XLS (66 pages)
- NX-920G (72 pages)
- TK-2170/3170 (51 pages)
- NXR-710/810 (2 pages)
- TK-7360HV/8360HU (2 pages)
- TM-D710GE (55 pages)
- TM-D710GE (77 pages)
- NX-210G (48 pages)
- TK-480/481 (37 pages)
- TK-2312/3312 (2 pages)
- DNN991HD (1 page)
- DNN991HD (36 pages)
- DNN991HD (68 pages)