Kenwood CAW-CKIMVW1 - Manual (Page 33)

KFC-S6894C
6”x8” 3-way Speaker
240w
4ohms 80W
PEAK
POWER
RATED
POWER
KFC-S5794C
5”x7” 3-way Speaker
220w
4ohms 75W
PEAK
POWER
RATED
POWER
KFC-E1364C
130mm 3-way Speaker
150w
4ohms 28W
PEAK
POWER
RATED
POWER
KFC-E1354C
130mm Dual Cone Speaker
140w
4ohms 28W
PEAK
POWER
RATED
POWER
KFC-E1064C
100mm 3-way Speaker
120w
4ohms 20W
PEAK
POWER
RATED
POWER
KFC-E1054C
100mm Dual Cone Speaker
110w
4ohms 20W
PEAK
POWER
RATED
POWER
KFC-E1764C
170mm 3-way Speaker
200w
4ohms 35W
PEAK
POWER
RATED
POWER
KFC-E1754C
170mm Dual Cone Speaker
180w
4ohms 35W
PEAK
POWER
RATED
POWER
Model Size Peak Power Rated Power Sensitivity Impedance
Frequency
Response
Magnet Weight
Mounting
Depth
KFC-E1764C 170mm 200W 4ohms 35W 92dB/W/m 4 ohms 30Hz - 22kHz 150g 45.5mm
KFC-E1364C 130mm 150W 4ohms 28W 91dB/W/m 4 ohms 40Hz - 22kHz 125g 44.6mm
KFC-E1064C 100mm 120W 4ohms 20W 90dB/W/m 4 ohms 45Hz - 22kHz 100g 41.9mm
KFC-E1754C 170mm 180W 4ohms 35W 92dB/W/m 4 ohms 30Hz - 20kHz 150g 44.5mm
KFC-E1354C 130mm 140W 4ohms 28W 91dB/W/m 4 ohms 40Hz - 20kHz 125g 44.6mm
KFC-E1054C 100mm 110W 4ohms 20W 90dB/W/m 4 ohms 45Hz - 20kHz 100g 41.9mm
KFC-S6894C 6"x8" 240W 4ohms 80W 87dB/W/m 4 ohms 63Hz - 22kHz 222g 60mm
KFC-S5794C 5"x7" 220W 4ohms 75W 87dB/W/m 4 ohms 63Hz - 22kHz 178g 52mm
SPEAKER Rated
Power
X-Series Regular Series Entry Series
KAC-X1D XR400-4 KAC-X5D KAC-7204 KAC-8405 KAC-5205 KAC-7405 KAC-6405 KAC-6203
Rated Power at 4 ohms 75W 60W 60W 60W 40W
Rated Power at 2 ohms 100W 90W 75W 90W 60W
X-Series
XR-1800P 110W BEST
KFC-X712 80W BEST
KFC-X693 130W GOOD
KFC-X173 80W GOOD
Regular
Series
KFC-S703P 80W BEST GOOD GOOD
KFC-S1794 70W BEST GOOD GOOD
KFC-S1694 70W BEST GOOD GOOD
KFC-S6994 120W BEST GOOD
KFC-S6984 110W BEST GOOD
KFC-S6974 100W BEST GOOD
Entry
Series
KFC-M1634A 60W BEST GOOD
KFC-M6944A 110W GOOD GOOD
KFC-M6934A 80W BEST GOOD
Note: In order to obtain the best amplifier / speaker performance without failure even when according to the above chart:
1) DO NOT raise the headunit’s volume to its fullest.
2) DO NOT set the amplifier’s input sensitivity to its maximum, and always set it to match the combining headunit’s pre-out level.
If you do not follow these two rules, clipping signals will output from the amplifier which will result in speaker damage.
RECOMMENDED SYSTEM CHART
3 3
CUSTOM FIT