Kenwood CAW1142-04 - Manual (Page 2)

Connect all of the needed wiring harnesses and check the connections carefully.
2-DIN CAW-1142-04
2-DIN 12.301142-04
1 2
3 4
5 6
Remove 2 screws and use plastic
wedge to remove plastic rim. Car is equipped with no/original or
aftermarket headunit.
Remove 2 screws and use plastic
wedge to remove panel. Place head unit including mounting
plates and supporting bracket.
Tighten headunit with 4 screws. Place panels back in reverse order.
Connect all of the needed wiring harnesses and check all connections carefully