Kenwood TK-3202E - Discontinued - Manual (Page 10)

4
If you are not using a speaker/
microphone, install the cover over the
speaker/ microphone jacks using the
supplied 3 x 6 mm screw.
Note: To keep the transceiver water
resistant, you must cover the speaker/
microphone jacks with the supplied
cover.
I
NSTALLING THE
C
OVER OVER THE
S
PEAKER
/ M
ICROPHONE
J
ACKS
I
NSTALLING THE
(O
PTIONAL
) S
PEAKER
/ M
ICROPHONE
(
OR
H
EADSET
)
1 Insert the speaker/ microphone
(or headset) plugs into the
speaker/ microphone jacks.
2 Attach the locking bracket using
the supplied 3 x 6 mm screw.
Note: The transceiver is not fully water
resistant while using the speaker/
microphone.
Speaker/ microphone
locking bracket
Speaker/ microphone
jack cover