Adjusting the cross over frequency, Select the item to adjust, then make adjustment, Perform steps – Kenwood DDX3021 User Manual
Page 34: Of “selecting a preset sound mode,” then, Adjust the sound of each band
34
DDX6021BT/DDX6051BT/DDX4021BT/DDX4051BT/DDX3021/DDX3051
Adjusting the cross over
frequency
1
On <Top Menu>:
2
3
Select the item to adjust, then
make adjustment.
Adjusts the subwoofer level.
Adjusts the cross over frequency.
Selects the phase for the subwoofer. *
2
Adjusts the cross over for front or rear
speakers (high pass filter).
Adjusts the cross over for subwoofer
(low pass filter).*
1
*
1
Adjustable only when the subwoofer is
activated. (
☞
page 40)
*
2
Not selectable when <Freq> is set to
<Through>.
Adjusting the sound precisely
1
Perform
steps
1
and
2
of
“Selecting a preset sound
mode,” then...
2
3
Adjust the sound of each
band.
Flat
Changes level of Bass/
Middle/Treble to 0.
Frequency Selects frequency.
Level
Adjusts level.
Q Factor
Adjusts the width of the
frequency.
Bass EXT
Activates/deactivates
bass.
SW Level
Adjusts subwoofer level.*
The adjustments are stored and <User>
is activated.
*
Adjustable only when the subwoofer is activated.
(
☞
page 40)
EN_LVT2269-001A_EQ.indb 34
EN_LVT2269-001A_EQ.indb 34
11/11/28 10:08
11/11/28 10:08