Axis Communications 290A - Manual (Page 6)

Network Power
AXIS 211
6 290A Installation Instructions
5. AXIS 211 - plug the green power connector coming from the 12V DC power supply
into the green socket on the camera.
AXIS 211A - replace the 4 pin green power connector coming from the 12V DC power
supply with the 4 pin green terminal block supplied with the camera:
AXIS 211A
Network Power
4 pin terminal block
Black/white
wire (-)
wire (+)
Black
AXIS 221/223M - replace the 4 pin green power connector coming from the 12VDC
power supply with the 3 pin green terminal block supplied with the camera and connect
the wires.
Power Network
3 pin terminal block
Black
Black/white
wire (-)
wire (+)
not used
AXIS 221/223M