Audio settings – Kenwood KMR-D358 User Manual

Page 12

Data Size:

B6L (182 mm x 128 mm)

Book Size:

B6L (182 mm x 128 mm)

AUDIO SETTINGS

While listening to any source...
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select [AUDIO CONTROL], then press the knob.
3 Turn the volume knob to make a selection (see the following table),

then press the knob.

Repeat

step

3 until the desired item is selected or activated.

4 Press and hold

to exit.

(or

using

RC-406)

1 Press AUD to enter [AUDIO CONTROL].
2 Press J/K to make a selection, then press ENT IW.

To return to the previous setting item or hierarchy, press

Default: XX

SUB-W LEVEL –15 to +15 (0): Adjusts the subwoofer output level.

BASS LEVEL

–8 to +8 (+6):

Adjusts the level to memorize for each source. (Before
making an adjustment, select the source you want to
adjust.)

MID LEVEL

–8 to +8 (+5):

TRE LEVEL

–8 to +8 (0):

EQ PRO (for

KDC-X398

)

BASS ADJUST BASS CTR FRQ

60/ 80/ 100/ 200HZ: Selects the center frequency.

BASS LEVEL

–8 to +8 (+6): Adjusts the level.

BASS Q FACTOR 1.00/ 1.25/ 1.50/ 2.00: Adjusts the quality factor.

BASS EXTEND

ON: Turns on the extended bass. ; OFF: Cancels.

MID ADJUST MID CTR FRQ

0.5/ 1.0/ 1.5/ 2.5KHZ: Selects the center frequency.

MID LEVEL

–8 to +8 (+5): Adjusts the level.

MID Q FACTOR

0.75/ 1.00/ 1.25: Adjusts the quality factor.

TRE ADJUST

TRE CTR FRQ

10.0/ 12.5/ 15.0/ 17.5KHZ: Selects the center frequency.

TRE LEVEL

–8 to +8 (0): Adjusts the level.

PRESET EQ

DRIVE EQ/ TOP40/ POWERFUL/ ROCK/ POPS/ EASY/ JAZZ/
NATURAL/ USER: Selects a preset equalizer suitable to the music
genre. (Select [USER] to use the customized bass, middle, and treble
settings.)
[DRIVE EQ] is a preset equalizer that reduces noise from the road.

BASS BOOST

LEVEL1

/ LEVEL2/ LEVEL3: Selects your preferred bass boost level. ;

OFF:

Cancels.

LOUDNESS

LEVEL1/ LEVEL2: Selects your preferred low and high frequencies
boost to produce a well-balanced sound at a low volume level. ;
OFF: Cancels.

SUBWOOFER SET

ON: Turns on the subwoofer output. ; OFF: Cancels.

LPF SUBWOOFER

THROUGH: All signals are sent to the subwoofer. ; 85HZ/ 120HZ/
160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/
160 Hz are sent to the subwoofer.

SUB-W PHASE

REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
(Selectable only if a setting other than [THROUGH] is selected for
[LPF SUBWOOFER].)

HPF

THROUGH: All signals are sent to the speakers. ; 100HZ/ 120HZ/
150HZ: Audio signals with frequencies higher than 100 Hz/ 120 Hz/
150 Hz are sent to the speakers.

FADER

R15 to F15 (0): Adjusts the rear and front speaker output balance.

BALANCE

L15 to R15 (0): Adjusts the left and right speaker output balance.

VOLUME OFFSET
(Default: 0)

–8 to +8 (for AUX) ; –8 to 0 (for other sources): Presets the volume
adjustment level of each source. (Before adjustment, select the source
you want to adjust.)

SOUND RECNSTR
(Sound
reconstruction)

ON: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost
in audio data compression. ; OFF: Cancels.

[SUB-W LEVEL]/ [LPF SUBWOOFER]/ [SUB-W PHASE] is selectable only if
[SUBWOOFER SET] is set to [ON].

EN_KDC-X398[KW_K0]f.indd 12

29/8/2013 5:04:27 PM