Kenwood TM-D710GA - Manual (Page 16)

8
GETTING ACQUAINTED
OPERATION PANEL (FRONT)
■ In Normal Mode
a CALL
Press [CALL] to select the Call channel.
Press [CALL] (1s) to start Call scan.
b VFO
Press [VFO] to enter VFO mode, then rotate the Tuning control to select an
operating frequency.
Press [VFO] (1s) to start VFO scan.
c MR
Press [MR] to enter Memory Channel mode, then rotate the Tuning control to
select a Memory channel.
Press [MR] (1s) to start Memory scan.
d Tuning Control
Rotate to select an operating frequency or Memory channel, change the scan
direction, etc.
Press the Tuning control to enter MHz mode (while in VFO or Call mode) or to
toggle the display between the channel name and frequency (while in Memory
Channel mode).
Press Tuning control (1s) to start MHz scan or Group scan.
e KEY
Each time you press [KEY], the Operation Keys mode toggles as follows:
APRS keys
➡ GPS keys ➡ Normal keys
f F
Press [F] to enter Function mode.
Press [F] (1s) to turn the transceiver key lock function ON and OFF.