Kenwood TK-7360HV/8360HU - Manual (Page 2)

Options
All accessories and options may not be available in all markets. Contact an authorized
Kenwood dealer for details and complete list of all accessories and options.
Specifications
Model TK-7360HV TK-8360HU
GENERAL
Frequency Range
136~174 MHz 450~520 MHz
Number of Channels
Zone Max.128 per Radio
Ch/GID Max.128 per Zone
Channel Spacing
Wide 25 kHz 25 kHz
Narrow 12.5 kHz 12.5 kHz
Operating Voltage 13.6 V DC±15 %
Current Drain
Standby 0.4 A 0.4 A
Receive 1.0 A 1.0 A
Transmit 14.0 A 14.0 A
Operating Temperature Range -22 ºF ~ +140 ºF (-30 ºC ~ +60 ºC)
Frequency Stability ±2.5 ppm (-22 ºF ~ +140 ºF)
Antenna Impedance 50 Ω
Channel Frequency Spread 38 MHz 70 MHz
Dimensions (W x H x D), 6.3” x 1.7” x 5.4”
Projections not included (160 mm x 43 mm x 137 mm)
Weight (net) 2.6 lbs. (1.18 kg)
FCC ID K44415401 K44415502
Model TK-7360HV TK-8360HU
RECEIVER (Measurements made per EIA/TIA-603)
Sensitivity (12dB SINAD)
Wide 0.28 µV
Narrow 0.35 µV
Selectivity
Wide 75 dB
Narrow 65 dB
Intermodulation Distortion
Wide 70 dB
Narrow 65 dB
Spurious Response 75 dB
Audio Output
(4
Ω Impedance) 4 W with less than 5 % distortion
TRANSMITTER (Measurements made per EIA/TIA-603)
RF Output Power
5 W / 25 W / 50 W 5 W / 25 W / 45 W *1
Spurious Response 70 dB
Type of Emission
Wide 16K0F3E
Narrow 11K0F3E
FM Hum & Noise
Wide 45 dB
Narrow 40 dB
Microphone Impedance 600 Ω
Audio Distortion
Wide 3 %
Narrow 5 %
*1: 490 ~ 512 MHz: 5/25/40 W, 512 ~ 520 MHz: 5/25/35 W
Specifications are subject to change without notice, due to advancements in technology.
FleetSync ® is a registered trademark of JVC KENWOOD Corporation.
LTR ® is a registered trademark of Transcrypt International.
Windows ® is a registered trademark of Microsoft Corporation in the United States and other countries.
All other trademarks are property of their respective owners.
■ KMC-35
Microphone
(Supplied)
■ KMC-36
Microphone
with Keypad
■ KMC-9C
Desktop Microphone
■ KES-3
External Speaker
■ KES-5
External Speaker
(requires KCT-60 option)
■ KMB-10
Key Lock Adapter
■ KLF-2
Line Filter
■ KCT-18
Ignition Sense Cable
(requires KCT-60 option)
■ KCT-36
3m Extension Cable
(for KCT-60)
■ KCT-60
DB 15-to-15 Pin
Molex Adaptor Cable
■ VGS-1
Voice Storage Unit
(uses 26p connector)
Standard MIL 810C MIL 810D MIL 810E MIL 810F MIL 810G
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II 500.5/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II 501.3/Procedure I, II 501.4/Procedure I, II 501.5/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II 502.3/Procedure I, II 502.4/Procedure I, II 502.5/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I 503.3/Procedure I 503.4/Procedure I, II 503.5/Procedure I
Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I 505.5/Procedure I
Rain* 2 506.1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506.4/Procedure I, III 506.5/Procedure I, III
Humidity 507.1/Procedure I, II 507.2/Procedure II, III 507.3/Procedure II, III 507.4 507.5/Procedure II
Salt Fog* 2 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4 509.5
Dust * 2 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III 510.5/Procedure I
Vibration 514.2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I 514.6/Procedure I
Shock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV, V 516.5/Procedure I, IV, V 516.6/Procedure I, IV, V
International Protection Standard
Dust & Water Protection IP54: Radio itself
*1: Necessary conditions are: (1) KMC-35/36 microphone is connected; (2) cap is installed on speaker connector;
(3) cover is installed on D-sub 15-pin connector; and (4) neither KCT cable nor SP cable is connected.
Applicable MIL-STD & IP
ADS#58711 Printed in USA