Kenwood NXR-710/810 - Manual (Page 2)

NXR-710 NXR-810
GENERAL
Frequency Range K 136-174 MHz 450-520 MHz
K2 - 400-470 MHz
Number of Channels 30
Channel Spacing Analog 12.5 / 15 / 25 / 30 kHz 12.5 / 25 kHz
Digital 6.25 / 7.5 / 12.5 / 15 kHz 6.25 / 12.5 kHz
PLL Channel Step 2.5 / 3.125 kHz 3.125 / 5 kHz
Current Drain Standby 0.5A
Receive 1.0A
Transmit 11.0A
TX Power 50% Duty 50 W 40 W
100% Duty 25 W 25 W
Frequency Stability ± 1.0 ppm ± 0.5 ppm
Operating Voltage 10.8 -15.6 V DC
Operating Temperature Range -22˚ F to +140˚ F (-30˚ C to +60˚ C)
Antenna Impedance 50 Ω
Dimensions (W x H x D) Projections not included 19 x 3-1/2 x 13-1/3 inch (483 x 88 x 340 mm)
Weight (net) 21.4 lbs (9.7 kg)
FCC ID K K44422300 K44422400
K2 - K44422401
IC Certification K 282F-422300 -
K2 - 282F-422401
RECEIVER
Sensitivity Digital @ 6.25kHz (3% BER) 0.22 µV
Digital @ 12.5kHz (3% BER) 0.28 µV
Analog (12 dB SINAD) 0.28 µV
Selectivity Analog @ 25 kHz 83 dB 80 dB
Analog @ 12.5 kHz 77 dB 74 dB
FM Hum & Noise Analog @ 25 kHz 55 dB
Analog @ 12.5 kHz 50 dB
Intermodulation Distortion 80 dB
Spurious Response 90 dB
Audio Distortion (Ext. SP) Less than 2.5% at 1000 Hz
Audio Output (Ext. SP) 4 W (at 4 Ω , less than 5% distortion)
TRANSMITTER
RF Power Output 25 W to 50 W 25 W to 40 W
Spurious & Harmonics 80 dB
FM Hum & Noise Analog @ 25 kHz 55 dB
Analog @ 12.5 kHz 50 dB
Audio Distortion Less than 1% at 1000 Hz
Modulation 16K0F3E, 11K0F3E, 8K30F1E,
8K30F1D, 8K30F7W, 4K00F1E,
4K00F1D, 4K00F7W, 4K00F2D
■ KMC-27A
Microphone
(MIL-SPEC noise-canceling)
■ KMC-27B
Microphone
■ KMC-35
Microphone
■ KMC-9C
Desktop Microphone
■ KES-5
External Speaker
■ KTI-3M
Network Interface
Unit
Options
Main Specifications
All accessories and options may not be available in all markets.
Contact an authorized Kenwood dealer for details and complete list of all accessories and options.
Analog measurements made per TIA/EIA 603 and specifications shown are typical. LTR ® is a registered trademark of Transcrypt International. Windows ® is a registered trademarks of Microsoft Corporation.
Specifications are subject to change without notice, due to advancements in technology. AMBE+2 TM is a trademark of Digital Voice Systems Inc. NXDN ® is a registered trademark of JVC KENWOODCorporation and Icom Inc.
NEXEDGE ® is a registered trademark of JVC KENWOOD Corporation in USA and various other countries.
ADS#56811 Printed in USA