Enhanced operating ease and visibility, Power-on message, Dual receive on same band (vxv, uxu) – Kenwood TH-D72A User Manual
Page 3: Kenwood sky command system ii, Weather alert/rx (us only)
Enhanced operating ease and visibility
Thanks to the menu and arrow keys, selecting the many
different functions is intuitively easy. All keys are backlit to
facilitate use in the dark, and the full dot matrix LCD screen
ensures the icons and text messages are clearly visible. Also,
the rotary encoder knob on the top of the transceiver allows
separate adjustment of volume and frequency.
MIL-STD810 & IP54 weatherproofing
Heavy-duty specs mean you do not have to worry about
getting caught in a shower. Fully prepared for tough outdoor
conditions, the TH-D72A is very robust. And as well as
offering IP54 levels of dust-proofing and splash-proofing,
it meets or exceeds the US MIL-STD standards for rain,
humidity, vibration and shock.
Power-on message
On powering up, the transceiver will display your call sign and
a message for 2 seconds. You can compose messages of up
to 8 characters, and if you use the MCP-4A software you can
have the transceiver display an icon of your own design.
Long operating hours
(high-capacity battery included)
The TH-D72A comes with a rechargeable 1,800mAh
lithium-ion battery. A single charge will power the transceiver
for approximately 6 hours of continuous use with TX output
set to the 5-watt maximum. Output can be set to HI (5W),
LOW (0.5W), or EL (0.05W).
Dual receive on same band (VxV, UxU)
In addition to simultaneous receive on both 144 MHz and
440 MHz bands, this radio can receive two frequencies on
the same band. This means, say, that you can arrange to
have both the call channel and local channel, or the repeater
channel and local channel, on the same VHF or UHF band.
Kenwood Sky Command System II
The Kenwood Sky Command System II allows you to use the
TH-D72A for remote access to Kenwood’s designated
HF radios. Operating as the Commander, your TH-D72A
transmits control signals to the Transporter, which also
relays your voice to the HF radio. In return, HF signals are
transmitted back to the Commander. This system allows you
to transmit and receive HF signals, set frequencies (with LCD
confirmation), switch memory channels, and much more – all
remotely. You can thus enjoy HF access using the TH-D72A
while making a quick trip to the local store.
Weather Alert/RX (US only)
This transceiver is capable of receiving the NOAA Weather
Band and responding to emergency transmissions such as
storm warnings by emitting an audible alert tone.
■
Automatic display of relay path
A pop-up display showing the call
sign of a digipeater currently relaying
your own beacon enables you to
check on wireless traffic at a glance.
Messaging
•
Messages: up to 100
(max. 67 characters each)
•
Status: 5 x max. 42 characters
•
User phrases (editable messages):
8 types x max. 32 characters
A special call function provides immediate notification
when a message is received from a designated station.
Multiple functions accessible
from over 60 APRS
®
menus
•
QSY function (exchange of operating frequency data)
•
Auto message reply
•
Packet filter
•
Decay algorithm
(automatic extension of transmit interval)
•
Proportional pathing (automatic selection of relay path)
•
SmartBeaconing™
•
57 graphic symbols (icons)
•
3 types of grid square locator
Other features
●
1,000 memory channels and 8-character names
●
9 scan
modes (VFO, Program, MHz, Memory, Memory Group, Call,
Tone, CTCSS, DCS)
●
42 CTCSS frequencies
●
104 DCS
(Digital Code Squelch) codes
●
Cross-tone
●
Waypoint export
●
DX
cluster
tune
●
Clock
(date/time)
●
Band
mask
●
Call channel
●
Monitor
●
Auto power-off
●
MHz mode
●
Selectable frequency step
●
Shift
●
VOX
●
Auto repeater
offset
●
Automatic
simplex
checker
●
DTMF
memory
(10 channels, 16 digits)
●
DTMF remote control
●
Time-out
timer
●
Key
lock
●
APRS
lock
●
Power-on
password
●
Memory shift
●
Programmable VFO
●
Key beep on/off
●
Programmable
function
key
●
Channel
display
mode
●
Adjustable
LCD
contrast
●
Reset
(VFO, PART, FULL)
●
External GPS receiver input (2.5mm stereo jack)
COM connector
ø3.5 EXT SP
MBC
HF antenna
144 MHz band
HF receive audio
Commander (CMD)
TH-D72A
440 MHz/144 MHz
Transporter (TRP)
TM-D710A
440 MHz/144 MHz
HF Transceiver
TS-590S
440 MHz band
Confirmation of HF frequency
440 MHz band
Voice signals, Control signals