Kestrel, 4000 pocket weather, Tracker 15 – Kestrel 4000 User Manual
Page 8

Kestrel
®
4000 Pocket Weather
®
Tracker
15
Auto Store
(On/Off)
When On, data is automatically stored at
preset Store Rate. When Off, data is only
stored when manually captured with the
button.
Press or to toggle between
On and Off.
Store Rate*
(2 sec – 12 hr)
The frequency at which data sets are
automatically stored. (Battery life may be
shortened if data is stored frequently.)
Press or to increase or
decrease Store Rate frequency.
Overwrite
(On/Off)
This setting only applies when the data
log is full. When On, oldest data point is
discarded to allow memory for the new
data point. When Off, new data points are
not saved.
Press or to toggle between
On and Off.
Man Store
(On/Off)
When On, data is stored when the
button is pressed. When off, the
button is
disabled.
Press or to toggle between
On and Off.
* When unit is off, data is NOT stored for 2 sec and 5 sec Store Rates.
Measurements
Measurement screens can be turned off, or “hidden” from the normal measurement navigation. For
example, if wind chill is not of interest, it can be hidden. Press the or button to toggle between ON
and OFF for each individual measurement. Press the or button to highlight the desired measurement.
Press the button to return to the Main Setup Menu. Even when measurements are hidden, the Kestrel
Meter will continue to log data for all measurements. If you wish to see the logged data for measurements
that are hidden, simply enter the Measurement screen and turn them back on. The data will be stored in the
same manner as all other measurements, as specified in the Store Rate.
Graph Scale
These settings control the chart limits of your Kestrel Meter. Depending on the conditions, the lower and
upper limits of the chart scale may need to be adjusted in order to get the best view of the data. Highlight
the desired measurement by pressing the or button. Select the highlighted measurement by
pressing the button. Press the or button to increase or decrease the value of the limits. Press the
or button to change between the upper and lower limits. Press the button to exit and return to the
Measurement Selection screen. Press the button to return to the Main Setup Menu.
Wind Speed
Temperature, Dewpoint,
Wet Bulb Temp, Wind Chill &
Heat Index
Pressure
Altitude,
Density
Altitude
m/s meters per second
km/h kilometers per hour
kt knots
mph miles per hour
ft/m feet per minute
Bft Beaufort
°C
Celsius
°F
Fahrenheit
InHg inches
mercury
HPa hectopascals
psi pounds per
square inch
mb milibar
m meters
ft feet