AVerMedia Technologies EB1004 User Manual
Page 26
23
3.7.4 MOTION SETUP
To change MOTION CAMERA,
1. Press or to move the arrowhead cursor to MOTION CAMERA in the
menu.
2. Press the channel buttons to select cameras that you want to setup.
To setup all cameras, press
. You will see the screen shows
MOTION CAMERA 1 2 3 4. Press the same button again to cancel the setting.
To setup channel 1 and 4 only, press
. You will see the screen shows
MOTION CAMERA 1 4.Press the same buttons again to cancel the
setting.
To setup channel 2 and 3 only, press
. You will see the screen shows
MOTION CAMERA 2 3 . Press the same buttons again to cancel the
setting.
To adjust MOTION SENSIVITY,
1. Press
or to move the arrowhead cursor to MOTION SENSITIVITY in
the menu.
2. Press repeatedly to cycle through the numbers. The sensitivity level
ranges from 1 to 10. Level 10 is the least sensitive one and Level 1 is the
most sensitive one.
To setup the MOTION RECORD TIME,
1. Press
or to move the arrowhead cursor to MOTION RECORD
TIME in the menu.
MOTION SETUP
>MOTION CAMERA _ _ _ _
MOTION SENSITIVITY 01
MOTION RECORD TIME 05
PRESS (< , >), THEN(SELECT)
PRESS (MENU) TO EXIT